Catalytic Wet Oxidation Unit

Supercritical Carbon Dioxide Drying Plant

Drying Vessel parameters required: 100 bar, 250 degrees Celsius, carbon dioxide flow meter (according to manufacturer's parameters) and liquid pump.


Reactor utilizing supercritical CO₂and the volume is 500ml.In addition to many years experiences and all the conforming with ASME CODE, that ensures the safety.

Technical Parameters

Extraction Vessel500mL*1 SetMax working condition:100 bar at 250℃ or 350kgf/cm2 at 80℃
Separate Vessel300mL*2 Set
CO₂Storage Vessel500mL*1 Set
CO₂High Pressure PumpMax Flow Rate: 100mL/Min
Co-Solvent Pump & SystemMax Flow Rate: 12mL/Min
Recycle SystemFiltering Vessel Systems
Temperature UtilityChiller & Heating Bath System
Control SystemTouch Panel Type
StructurePacking Type

Featrue

Safety

Design based on ASME

Certified by ASME

Safety device

Convenience maintenance through the alarm list


Convenience

Design based on ASME

Certified by ASME

Safety device

Convenience maintenance through the alarm list


Control system

Touch screen to control & monitor

DAQ and Auto system control

Process variables

Temperature

Stability by circulating system of heating carrier

Cooling and heating graded control


Pressure

"Accuracy 1.5% by controlling back pressure regulator"

Accurate back pressure regulator


TEST

Various test according to different test materials

Can’t find what you were looking for?

Need a custom solution?

Related Products

50mL Fixed Bed Catalyst Evaluation Reactor Technical Proposal

50mL Fixed Bed Catalyst Evaluation Reactor Technical Proposal

Part A want to buy one set fixed bed reactor for research laboratories, this device is mainly used for technical investigation, reactor is consist of air inlet system, feed system, preheat system, fixed bed reactor, reaction gas after treatment system and control system.

Copyright © Essenton Guangdong International Limited All Rights Reserved | Sitemap | Powered by Reanod